ULTI VESA Extension Adapter – 75×75 / 100×100 to 200×100 / 200×200 mm

The ULTI VESA Extension Adapter connects a mount with a 75 × 75 mm or 100 × 100 mm VESA mounting plate to a TV or monitor with 200 × 100 mm or 200 × 200 mm VESA mounting holes.

Designed for most 23–42-inch LED, LCD and plasma flat-panel TVs and compatible monitors, the four steel extension arms expand the mounting interface of a compatible existing mount.

Compatibility and installation

A compatible existing VESA mounting plate is required. Attach the extension arms to the plate to provide the supported larger screen-side hole pattern. VESA measurements specify the horizontal and vertical distances between mounting-hole centres.

Screen size alone does not establish compatibility. Check the screen’s VESA pattern, weight and rear clearance, together with the mount’s mounting interface and load rating. Curved screens are supported subject to mounting fit and clearance.

The adapter is rated for up to 30 kg. It does not increase the mount’s capacity: use the lower applicable weight limit and follow the mount and screen manufacturers’ installation instructions.

The technical drawing shows 200 × 200 mm mounting-hole spacing; this is distinct from the 215 × 215 mm overall dimensions.

Package contents

• Four VESA extension adapter arms
• Assembly screws

Not included: VESA mounting plate, monitor arm, wall mount or screen. A compatible mount with a 75 × 75 mm or 100 × 100 mm VESA mounting plate must be supplied separately.