Smart Home Tech Show 2026: What to Test at ULTI Booth 8708

ULTI will be at Smart Home Tech Show 2026 at Suntec Convention Centre, Level 4, Booth 8708 from 1–4 October. A show visit is most useful when you arrive with the measurements and questions that affect your real workspace.

Bring the details that determine fit

• For a standing desk: room width, desk depth, user height and the equipment that will move with the desktop.
• For a monitor arm: monitor model, bare weight, VESA pattern, desk thickness and a photo of the desk underside.
• For a chair: desk height, current chair problem, body measurements and whether armrests need to fit beneath the desk.
• For a PC holder: actual case height, depth, width and weight, plus the location of vents and ports.

What to test in person

Raise and lower a desk while considering cable movement, monitor-arm clearance and chair position. Sit in a chair for more than a quick first impression: set seat height, seat depth, lumbar support and armrests in that order. For monitor arms, ask for a model-specific check rather than relying on screen size alone.

Questions to ask before paying

1. Which exact configuration and accessories are included in the show offer?
2. What are the delivery and assembly terms for my address?
3. What is the warranty route for this version?
4. Which measurements should I verify at home before installation?

Admission is free. Confirm current event details with the organiser, and see ULTI’s event page for the booth details. If you cannot visit, use the ULTI setup finder to begin from home.

Use the event visit to reduce uncertainty

Before travelling, save the current product page and make a short list of the details you need to confirm. At the event, take photos of the model label, configuration and written offer rather than relying on memory. A product demonstrated with different accessories, a different desk size or a temporary promotion may not be the same purchase you take home.

A practical event worksheet

• Room measurements, building-access notes and the maximum footprint available.
• Exact monitor and PC specifications where the setup includes arms or holders.
• The final model, colour, size and all included accessories.
• Delivery, assembly, warranty and return terms in writing.
• Any measurement you must re-check at home before booking installation.

After the event, compare the record against the official product page before completing payment. The most useful show deal is one that suits the room, equipment and ownership terms, not simply the largest discount label.

Validate the plan before installation

Before committing to the final position, lay out the equipment and check its complete path of movement. This means more than checking whether an item physically fits on the desk: confirm access to ports, ventilation, comfortable reach, cable routing and clearance from walls, drawers and chair arms. If the setup includes a powered desk, test it at the lowest and highest working position with normal equipment connected.

Keep a simple decision record

Save the exact product model, dimensions, weight or load details, compatibility information and the terms that apply to the purchase. Photograph the intended mounting area before installation. These small steps make it easier to confirm fit with a seller and make future changes to the setup much less uncertain.

Where an instruction manual or product specification conflicts with general advice, follow the manual for the exact product version. That is the reliable way to turn a guide into a safe, workable setup.