ULTI vs PRISM+ vs TITAN TV Wall Mounts in Singapore

Comparing ULTI, PRISM+ and TITAN TV wall mounts in Singapore? Start with the bracket type, your television’s exact VESA pattern and weight, the wall behind the finish, cable clearance and the installation scope. Brand name and advertised screen size are useful filters, but neither one proves that a mount is safe or suitable for a particular TV and wall.

This guide compares the current ranges and buying approach of ULTI, PRISM+ and TITAN, then explains where SANUS, Brateck and North Bayou fit. It is designed for Singapore homes, where concrete walls, feature panels, concealed services, power-point positions and installation access can change the right choice.

Checked 11 October 2026. Competitor ranges, specifications, prices and service terms can change. Always verify the exact model on the seller’s current product page before ordering.

ULTI vs PRISM+ vs TITAN: quick comparison

There is no universal winner for every room. A basic fixed mount can be the better purchase for a centred sofa and controlled glare, while a strong full-motion mount is more useful in an open-plan room, corner position or multi-angle seating layout. The correct decision comes from the complete TV-and-wall setup.

ULTI TV wall mounts: focused choices with local setup guidance

ULTI’s TV wall mount collection covers fixed and full-motion use cases. The range is easier to narrow when you first decide whether the screen should stay flat against the wall or move after installation.

ULTI Evo VM6 fixed mount

The ULTI Evo VM6 is a fixed, low-profile bracket with a stated 40–80-inch screen range. Its published mounting range is 100–600mm horizontally and 100–400mm vertically, and the bracket measures 635 × 420 × 27mm. It suits a straight-on viewing position where swivel and tilt are unnecessary.

The 27mm depth makes cable planning important. A deep power plug, rear-facing HDMI cable or streaming device can need more room than the bracket leaves. Check the TV’s connector direction and the position of the wall power point before drilling.

ULTI Vega full-motion mount

The ULTI Vega full-motion mount is the better ULTI comparison point when you need movement. Its current listing states support up to 55 inches and 35kg, VESA patterns from 100 × 100 through 400 × 400mm in the listed combinations, up to 503mm extension, tilt, swivel and post-installation levelling.

Advertised swivel is measured at the bracket. The television’s width and the distance from the wall can reduce the angle available in a real room. Measure the side clearance and test the intended viewing directions before assuming the full published movement will be usable.

Where ULTI is a practical fit

• You want a focused choice between fixed and articulating designs.
• You want to send the TV model and wall details to a Singapore seller before buying.
• You may want the mount and professional TV wall mount installation from the same store.
• You prefer a clear path from compatibility guidance to a locally available product.

PRISM+ TV wall mounts: a broad range tied closely to TV purchases

PRISM+ currently presents wall mounts within its wider TV and accessory range. Its published categories include fixed, swivel, ultra-slim and tilting mounts across different TV size bands. This gives shoppers several movement and profile choices, especially when purchasing a PRISM+ television at the same time.

Examples listed in the current range include the PF421 and PF701 fixed mounts, PS421 and PS801 PRO swivel mounts, PSF651 and PSF1001 ultra-slim mounts, and PT1001 tilting mount. Each has its own stated screen and load range. Treat those limits as filters; the exact VESA pattern, mounting-hole position, rear-panel shape and wall remain part of the fit check.

PRISM+ also publishes TV and mount installation terms. Read them before checkout, particularly if the TV will sit high, the wall has a special finish, an old bracket must be removed, or concealed cable work is expected. The displayed product price and the total completed-installation cost are different questions.

Where PRISM+ is a practical fit

• You are purchasing a PRISM+ TV and want to choose a mount during the same shopping journey.
• You want several fixed, swivel, slim-fit and large-screen options from one electronics brand.
• You have checked the precise mount model and current installation scope rather than choosing only by screen size.

TITAN TV brackets: many model-specific choices across retailers

TITAN brackets are commonly found through Singapore electronics and hardware retailers. The range spans fixed, tilting and swivel designs, but the shopping experience is model-led: the SGB number matters because size, VESA, load, profile and movement differ from one bracket to another.

For example, the TITAN SGB630 is currently described by Mega Discount Store as a tilting mount for 37–70-inch TVs, rated to 40kg, with listed VESA patterns up to 600 × 400mm and a 53mm wall profile. By comparison, Harvey Norman lists the TITAN SGB685 as a swivel mount for 43–70-inch TVs, rated to 45kg, with several VESA patterns up to 800 × 400mm.

Those examples show why “a TITAN bracket” is not enough information. Record the full model number, compare the seller’s page with any supplied manual, and keep the invoice. If two retailers show different specifications for the same model, stop and ask for written confirmation before installation.

Where TITAN is a practical fit

• You want to compare a wide set of model-specific fixed, tilt and swivel brackets.
• You are comfortable checking a retailer listing against the exact SGB model and manual.
• You already have an installer and can separately confirm labour, wall fixings and after-sales responsibility.

Who else should Singapore shoppers compare?

SANUS

SANUS is a specialist mount brand with fixed, tilt, full-motion, ceiling and other mounting formats. Its catalogue includes detailed movement and installation filters, and its MountFinder tool is useful when you want to start with the exact TV model. SANUS is a sensible comparison for buyers prioritising a broad specialist catalogue and premium full-motion options.

Brateck

Brateck offers fixed, tilt and full-motion TV wall mounts as part of a wider display-mounting range. It is worth comparing when you want many universal-bracket formats and are happy to source the exact model through a local distributor or retailer.

North Bayou

North Bayou, often shortened to NB, sells TV wall mounts alongside monitor arms and mobile carts. Availability and local support can depend on the seller, so verify the exact model, authorised supply route and warranty contact.

TV-manufacturer mounts

Samsung, LG and other TV makers sometimes offer model-specific slim or flush mounts. These can produce a very close fit, but compatibility may be limited to particular TV series. Check the full TV model code, not just the brand and diagonal size. Also confirm whether a future replacement television can reuse the bracket.

Seven checks that matter more than the logo

1. Exact TV model: Find the full model code on the rear label or settings menu. A family name such as “55-inch OLED” is not precise enough.
2. VESA pattern: Measure the horizontal and vertical distance between mounting holes in millimetres. Use our VESA pattern guide if the manual is unclear.
3. TV weight without the stand: Compare the manufacturer’s figure with the mount’s stated maximum load. Leave room for any accessory that the mount is also expected to carry.
4. Wall construction: Confirm the structural material behind paint, wallpaper, tile or feature panels. Concrete, masonry, timber framing and hollow partitions require different fixings and assessment.
5. Movement required: Use fixed for a stable straight-on position, tilt for higher placement or glare adjustment, and full motion when the screen must extend or turn. See the fixed vs tilt vs full-motion guide.
6. Cable and plug clearance: Check rear-facing ports, power plugs, HDMI bend radius, soundbar position and access for future changes.
7. Complete installation scope: Ask who supplies anchors, whether removal and disposal are included, what walls are excluded, whether cable concealment costs extra, and who returns if the bracket needs adjustment.

Which TV wall mount should you choose?

• Choose a focused local range such as ULTI when you want a straightforward fixed-versus-full-motion decision, compatibility guidance and an installation option in one place.
• Compare PRISM+ when you are buying one of its TVs or want its published fixed, swivel, slim-fit and large-screen mounting options.
• Compare TITAN by exact model number when you want a broad retailer-supplied range and can verify the SGB model’s specification and installation arrangements.
• Compare SANUS when a specialist premium mount, detailed fit tools or advanced full-motion hardware is the priority.
• Compare Brateck or North Bayou when you want more universal formats and have a trusted local source for the precise model.
• Check the TV maker’s own mount when a flush, model-specific installation is more important than reusability.

If you still cannot narrow the choice, send ULTI the full TV model, a photo of the mounting area, your intended wall location and the movement you need. We can check the published compatibility details before you order. WhatsApp ULTI at +65 8788 8866 for a quicker reply.

Frequently asked questions

Is ULTI better than PRISM+ or TITAN?

The answer depends on the exact TV, wall and movement required. ULTI is a strong choice for a focused local buying path with fixed and full-motion options and an installation service. PRISM+ has a broad range connected to its TV catalogue. TITAN offers many model-specific brackets through retailers. Compare verified specifications and total installation scope rather than choosing by brand alone.

Can I use a PRISM+ wall mount with another TV brand?

A universal mount can work with another television when the exact VESA pattern, TV weight, screen dimensions, mounting hardware and clearances all comply with the mount’s instructions. Confirm the individual PRISM+ bracket specification and warranty terms before ordering.

Can I use an ULTI mount with Samsung, LG, Sony, TCL, Hisense or Xiaomi TVs?

Brand alone does not determine compatibility. Many televisions use standard VESA patterns, but you must check the exact model’s hole pattern, weight, rear shape, required screws and connector clearance against the chosen ULTI mount.

Is a full-motion mount always better?

No. Full-motion mounts are valuable when the screen must turn, extend or serve several seating areas. A fixed mount is simpler and usually sits closer to the wall when the main seat is directly in front. Read the Singapore TV wall mount buying guide before deciding.

Can any wall support a TV bracket?

No. The visible surface does not reveal the structural support behind it. The installer must identify the wall construction, select suitable fixings and check for concealed services. Review the ULTI installation planning guide before drilling.